Anti-Slip Varnish ISG 6331

Product Description: The Invisible Shield for 100% OHS Compliance

The ultimate solution to slip and fall accidents on wet, smooth, or glossy surfaces! DryFiX ISG 6331 is a special two-component varnish that creates a transparent safety shield with a high friction coefficient on the surface, without ever ruining the aesthetic appearance (color and texture) of the applied floor.

It is specifically formulated for businesses that want to fully comply with Occupational Health and Safety (OHS) standards and eliminate life-threatening risks in wet areas. Moreover, it doesn't just provide slip resistance; it also repels water and acts as extra armor, protecting the surface against external factors and heavy wear.

Unique Advantages of the Product

• Invisible Braking System: Creates a high friction resistance that prevents feet or shoes from slipping, even when the floor is completely wet.
• Preserves Aesthetics: Thanks to its crystal-clear structure, it perfectly reflects the original color and pattern of the underlying marble, wood, or ceramic.
• Superior Adhesion Power: It locks onto even the toughest and glossiest surfaces, ensuring no peeling or blistering over time.
• Waterproofing: In addition to its anti-slip feature, it seals the surface against water, extending the lifespan of the floor.

Application Areas Offering Definitive Solutions

It perfectly adheres to a wide range of tough and slippery surfaces:

• Wet Areas: Acrylic bathtubs, shower trays, bathrooms, pool edges, and SPA zones.
• Natural and Glossy Stones: Stairs or floors covered with marble, granite, and mosaic.
• Industrial and Architectural Floors: Wooden decks, concrete factory floors, metal walkways, and ramps.

Technical Specifications and Consumption Values

Packaging and Storage Information

Step-by-Step Flawless Application Guide

1. Surface Preparation:

For the anti-slip varnish to lock onto the surface, the floor must be flawlessly clean. Any dust, construction mortar, oil, dirt, or water residues in the application area must be completely removed, leaving the floor bone dry.

2. Preparing the Mixture (Watch the Clock):

Mix components A and B in the specified proportions and stir thoroughly until you achieve a homogeneous (smooth) consistency. Since this mixture initiates a chemical reaction, it is mandatory to apply the prepared material to the surface within a maximum of 1 hour. Any leftover or expired material will harden and cannot be used.

3. Application to the Surface:

Apply the prepared varnish to the surface as a thin film layer using a roller or brush. Avoid applying the layer too thick (do not exceed 100-150 grams per square meter for each coat). After applying the first coat, wait exactly 1 day (24 hours) before moving on to the second coat.

 OHS and Safety Warnings

• Personal Protection: The product contains solvents and chemical components. Absolutely do not inhale during application; avoid skin and eye contact. Use appropriate occupational safety equipment (mask, gloves, goggles).
• Ventilation and Fire Risk: Application must be done in extremely well-ventilated environments. Since it may release flammable/combustible vapors, smoking is prohibited in the application area, and tools that spark must be avoided.
• Detailed Information: When necessary, always review the product's Material Safety Data Sheet (MSDS).