CER 404 (C1T) Tile Adhesive Mortar

Advantages

• Cost-effective and easy to apply.
• Does not sag on vertical surfaces.

Application Areas

• For indoor use.
• Cement-based surfaces like plaster and floor screed.
• Suitable for ceramic and tile coverings.

Application Instructions

• Mix a 25 kg bag with 5.60–6.00 liters of clean water at low speed in a mixer. Add powder slowly and mix 2–3 minutes until homogeneous.
• Let the mixture rest 5 minutes, then remix 1–2 minutes before use.

Warnings and Recommendations

• Surface must be dry, clean, and sound.
• Cracks or weak spots should be repaired at least 24 hours prior.
• Application and the following 24 hours must be in +5°C to +35°C.
• Avoid application on frozen surfaces, in wind, or on hot surfaces if freezing risk exists.

Storage

• Packaging: 25 kg Kraft bag
• Color: Gray
• Shelf life: 12 Months

Consumption

• 4.00–6.00 kg/m²

Technical Properties

• Product Type: Cement and Powder
• Color: Gray and White
• Water Ratio: 5.50–6.00 L / 25 kg
• Standard: TS EN 12004:2017
• Initial Tensile Adhesion Strength: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Water Immersion: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Heat Aging: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Freeze-Thaw Cycles: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Extended Open Time (20 min): ≥ 0.5 N/mm²
• Slip: ≥ 0.5 N/mm²
• Fire Reaction Class: A1
• Open Time: 2–3 Hours
• Workable Time: Max 20 Minutes
• Walkable: 24 Hours