CER 505 (C1TE) Tile Adhesive

Advantages

• Cost-effective and easy to apply.
• Does not sag on vertical surfaces.
• Provides a long working time.

Application Areas

• Suitable for indoor use.
• Cement-based surfaces such as plaster and floor screed.
• Application of ceramic and tile coverings.

Application Instructions

• Mix a 25 kg bag with 6.00–6.50 liters of clean water at low speed. Add powder slowly and mix 2–3 minutes until homogeneous.
• Let the mixture rest 5 minutes, then remix 1–2 minutes before use.

Warnings and Recommendations

• Surface must be dry, clean, and sound.
• Cracks or weak spots must be repaired at least 24 hours prior.
• Application and the following 24 hours must be in +5°C to +35°C.
• Avoid applying on frozen surfaces, in wind, or on hot surfaces if freezing risk exists.

Storage

• Packaging: 25 kg Kraft bag
• Color: Gray
• Shelf life: 12 months in dry, moisture-free conditions.
• Keep sealed and protected from damage.
• Protect from frost and sunlight.

Consumption

• 4.00–6.00 kg/m²

Technical Properties

• Product Type: Cement-Based Powder
• Color: Gray and White
• Water Ratio: 6.00–6.50 L / 25 kg
• Consumption: 4–6 kg/m²
• Standard Reference: TS EN 12004:2017
• Initial Tensile Adhesion Strength: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Water Immersion: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Heat Aging: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Freeze-Thaw Cycles: ≥ 0.5 N/mm²
• Tensile Adhesion Strength after Extended Open Time (20 min): ≥ 0.5 N/mm²
• Slip: ≥ 0.5 N/mm²
• Fire Reaction Class: A1
• Open Time: 2–3 Hours
• Workable Time: Max 20 Minutes
• Walkable After: 24 Hours