CER 707 (C2TES1) Tile Adhesive Mortar

Advantages

• Economical and easy to apply.
• Non-slip structure prevents sagging on vertical surfaces.
• Provides extended working time.
• Ensures strong adhesion, especially for large-format tiles and coverings.

Application Areas

• Suitable for both interior and exterior applications.
• Can be used on cement-based substrates such as plaster and wall screed.
• Ideal for installing large-size ceramic, tile, porcelain, granite, and marble coverings.

Application Instructions

• Mix a 25 kg bag with 6.25–6.75 liters of clean water using a low-speed mixer.
• Gradually add the powder into the water and mix for 2–3 minutes until a homogeneous mixture is obtained.
• Let the mixture rest for about 5 minutes and remix for 1–2 minutes before application.

Warnings and Recommendations

• The substrate must be dry, clean, and structurally sound.
• Cracks or weak areas should be repaired at least 24 hours prior to application.
• Ambient temperature during application and for the following 24 hours should be between +5°C and +35°C.
• Do not apply on frozen surfaces or under conditions where frost may occur. Avoid windy environments and overheated substrates.

Storage

• Packaging: 25 kg Kraft bag
• Color: Gray
• Shelf life: 12 months under proper storage conditions
• Store in a dry and moisture-free environment with unopened packaging.
• Protect the product from frost and direct sunlight.

Consumption

• 4.00 – 6.00 kg/m²

Technical Properties

• Product Type: Cement-Based Powder
• Color: Gray and White
• Water Ratio: 6.25–6.75 L / 25 kg
• Consumption: 4–6 kg/m²
• Standard: TS EN 12004:2017
• Initial Tensile Adhesion Strength: ≥ 1 N/mm²
• Adhesion Strength After Water Immersion: ≥ 1 N/mm²
• Adhesion Strength After Heat Aging: ≥ 1 N/mm²
• Adhesion Strength After Freeze-Thaw Cycles: ≥ 1 N/mm²
• Adhesion Strength After Extended Open Time (20 min): ≥ 0.5 N/mm²
• Slip: ≥ 0.5 N/mm²
• Fire Reaction Class: A1
• Pot Life: 2–3 Hours
• Working Time: Maximum 30 Minutes
• Walkable After: 24 Hours