CER 808 (C2TES2) Tile Adhesive Mortar

Product Banner Image
CER 808 (C2TES2) Tile Adhesive Mortar
Cement-based, high-performance C2TES2 class tile adhesive with reduced slip, extended open time, and superior S2 class elasticity.

Advantages

  • Economical and easy to apply.
  • Non-slip structure prevents sagging on vertical surfaces.
  • Long working time improves application efficiency.
  • Provides strong adhesion performance, especially for large-format tiles.

Application Areas

  • Suitable for both interior and exterior use.
  • Can be applied on cement-based surfaces such as plaster and wall screed.
  • Ideal for swimming pools and underfloor heating systems.
  • Recommended for large-size ceramic, tile, porcelain, granite, and marble coverings.

Application Instructions

  • Mix a 25 kg bag with 6.00–6.50 liters of clean water using a low-speed mixer.
  • Add the powder gradually into the water and mix for about 2–3 minutes until a homogeneous mixture is obtained.
  • Let the mixture rest for 5 minutes and remix for 1–2 minutes before application.

Warnings and Recommendations

  • The substrate must be dry, clean, and structurally sound.
  • Cracks or weak areas should be repaired at least 24 hours before application.
  • Ambient temperature during application and the following 24 hours must be between +5°C and +35°C.
  • Do not apply on frozen surfaces or under conditions where frost may occur. Avoid windy areas and hot substrates.

Storage

  • Packaging: 25 kg Kraft bag
  • Color: Gray and White
  • Shelf Life: 12 months under proper storage conditions
  • Store in dry environments with unopened packaging.
  • Protect from frost and direct sunlight.

Consumption

  • 4.00 – 6.00 kg/m²

Technical Properties

  • Product Type: Cement-Based Powder
  • Color: Gray and White
  • Water Ratio: 6.25 – 6.75 L / 25 kg
  • Consumption: 4 – 6 kg/m²
  • Standard: TS EN 12004:2017
  • Initial Tensile Adhesion Strength: ≥ 1 N/mm²
  • Adhesion Strength After Water Immersion: ≥ 1 N/mm²
  • Adhesion Strength After Heat Aging: ≥ 1 N/mm²
  • Adhesion Strength After Freeze-Thaw Cycles: ≥ 1 N/mm²
  • Adhesion Strength After Extended Open Time (20 min): ≥ 0.5 N/mm²
  • Slip: ≥ 0.5 N/mm²
  • Transverse Deformation: S2 ≥ 5 mm
  • Fire Reaction Class: A1
  • Pot Life: 2–3 Hours
  • Working Time: Maximum 30 Minutes
  • Walkable After: 24 Hours
Would You Like Us to Call You?

Our team will contact you as soon as possible to offer the most suitable solution for your needs.

Ara WhatsApp