Flex Tile Adhesive CER 606 (C2TE)

Advantages

• Cost-effective and easy to apply.
• Does not sag on vertical surfaces.
• Offers long working time and high adhesion performance.

Application Areas

• Suitable for indoor and outdoor use.
• Cement-based surfaces like plaster and floor screed.
• Large-format ceramic, tile, porcelain, granite, and marble installations.

Application Instructions

• Mix a 25 kg bag with 6.25–6.75 liters of clean water at low speed. Add the powder gradually and mix 2–3 minutes until homogeneous.
• Let the mixture rest for 5 minutes, then remix 1–2 minutes before use.

Warnings and Recommendations

• Surface must be dry, clean, and sound.
• Cracks or weak areas must be repaired at least 24 hours before application.
• Application and the following 24 hours must be within +5°C to +35°C.
• Avoid application on frozen surfaces, under wind, or on hot surfaces if freezing risk exists.

Storage

• Packaging: 25 kg Kraft bag
• Color: Gray
• Shelf life: 12 months, dry and moisture-free storage.
• Keep sealed and protected from damage.
• Protect from frost and sunlight.

Consumption

• 4.00–6.00 kg/m²

Technical Properties

• Product Type: Cement-Based Powder
• Color: Gray and White
• Water Ratio: 6.25–6.75 L / 25 kg
• Consumption: 4–6 kg/m²
• Standard Reference: TS EN 12004:2017
• Initial Tensile Adhesion Strength: ≥ 1 N/mm²
• Tensile Adhesion Strength after Water Immersion: ≥ 1 N/mm²
• Tensile Adhesion Strength after Heat Aging: ≥ 1 N/mm²
• Tensile Adhesion Strength after Freeze-Thaw Cycles: ≥ 1 N/mm²
• Tensile Adhesion Strength after Extended Open Time (20 min): ≥ 0.5 N/mm²
• Slip: ≥ 0.5 N/mm²
• Fire Reaction Class: A1
• Open Time: 2–3 Hours
• Workable Time: Max 30 Minutes
• Walkable After: 24 Hours Specified times apply at 20°C surface and ambient temperature. Times increase at lower temperatures and decrease at higher temperatures. DryFiX is not responsible for application errors due to misuse or non-compliance with recommended conditions.