SELF PRO RAPID Floor Leveling Screed

Advantages

• Easy and fast application thanks to its practical formulation.
• Provides high resistance against pressure, abrasion, and cracking.
• Can be safely applied in thicknesses between 1–20 mm.
• High flow performance ensures a smooth and homogeneous surface.
• Suitable for preparing floors before the installation of different floor coverings.

Application Areas

• Designed for interior floor applications.
• Suitable for areas with light pedestrian traffic such as shopping malls and commercial spaces.
• Can be applied on floors with underfloor heating systems.
• Used as a self-leveling underlayment beneath laminate, parquet, PVC, and similar floor coverings.

Application Instructions

Mix a 25 kg bag with 6.00–6.50 liters of clean water using a low-speed mixer. Add the powder gradually into the water and mix for approximately 2–3 minutes until a homogeneous mixture is obtained.Allow the mixture to rest for 1–2 minutes before application.

Pour the prepared mixture onto the floor and allow it to spread naturally. A trowel or squeegee may be used to accelerate the spreading process. After the application, level the surface with a spiked roller to eliminate air bubbles and ensure a smooth finish.

Warnings and Recommendations

The application surface must be clean, dry, and structurally sound.Weak areas and deep cracks should be repaired with DryFiX TRACK R2 repair mortar at least 24 hours before application.

The surface must be primed with a floor primer at least 2 hours before application.Avoid application in areas with excessive air circulation or in environments where frost may occur within 24 hours after application.

Laminate, parquet, and PVC floor coverings should be installed at least 48 hours after the application.Recommended application temperature is between +5°C and +35°C.All tools should be cleaned with water before the material hardens.