Double Component Semi Elastic Semi Flex

DryFiX Semi Flex 2K (Two-Component Semi-Elastic Waterproofing Mortar)

Product Description: The Invisible Shield Under Your Ceramics

Are you renovating your bathroom or balcony and worrying, "Will water leak to the floor below?" DryFiX Semi Flex 2K is a special cement-based, two-component (powder and liquid) waterproofing mortar produced to solve this exact problem from the root.

It is applied to the floors and walls right before laying tiles or ceramics. Once dry, it creates a seamless, joint-free, and semi-elastic armor. Thanks to its semi-elastic structure, it resists the minor movements and settling of the building; it doesn't crack instantly like classic mortars. It prevents water from leaking into lower floors or foundation walls for a lifetime.

Unique Advantages of the Product

• Semi-Elastic and Crack-Resistant: It adapts to the natural flexing of the building and is not brittle like rigid mortars.
• Excellent Adhesion Power: It grips the applied surface (concrete, plaster, etc.) almost like a weld and never peels off.
• Seamless and Continuous Armor: Since it is applied with a brush, it leaves no joints, connection points, or weak links on the surface.
• Practical Application: It is extremely easy to prepare and apply; it does not require extra advanced mastery.

Application Areas Offering Definitive Solutions

Safely used on all horizontal and vertical surfaces:

• Wet Areas: Under ceramics/tiles in bathrooms, toilets, and kitchens.
• Open Areas: On terraces and balconies (provided they are covered with ceramics or screed).
• Foundations and Retaining Walls: On the plinth and foundation walls of buildings.

Technical Specifications and Consumption Values

Packaging and Storage Information

Step-by-Step Flawless Application Guide

1. Surface Preparation (Crucial):

The application surface must be completely clean, dry, and solid. Remove oil, dirt, or paint residues from the surface. If there are deep cracks or holes, repair them with a cement-based repair mortar before starting the waterproofing.

Pro Tip: Before applying the waterproofing, slightly dampen the bare concrete or plastered surface with water. However, there must absolutely be no water puddles (ponding) left on the floor; it should only be damp.

2. Preparing the Mixture:

First, pour the 5 kg special liquid into a clean bucket. While gently whisking with a mixer, slowly add the 20 kg powder mortar into the liquid. Mix for about 3 minutes until there are no lumps left. Let the mortar rest for 3 minutes for the chemical reaction, and give it one final, brief mix right before you start applying. (Note: You must finish using the mixture within 45 minutes.)

3. Application to the Surface (Cross-Coat Logic):

Apply the prepared mortar thoroughly onto the surface using a brush or waterproofing trowel. You must apply at least 2 coats. After applying the first coat, wait about 4 hours for it to dry. When applying the second coat, move the brush in the exact opposite (crosswise) direction to the first coat. This ensures not even a pinhole-sized gap remains.

Extra Strength for Large Areas: On very wide terraces or floors with high movement, you can make the armor much more elastic and untearable by laying reinforcement (waterproofing mesh or fiberglass) between the first and second coats.

 Warnings and Golden Rules

• Absolutely DO NOT Add Water: When preparing the mixture, use only its own special liquid. Do not add even a single drop of normal water or any foreign substance into the bucket.
• Weather Conditions: The ambient temperature during application must be between +5°C and +35°C.
• Protection Period: After the application is finished, strictly protect the waterproofed area from direct sunlight, frost risk, and rain for 3 days.